DIY 5v linear voltage regulator circuit

This is a 5v linear voltage regulator circuit.Input voltage should not be more then 35V.

Step 1: Test It on the Breadboard

Test It on the Breadboard

Parts List :
1) LM7805

2) 100 nF (ceramic capasitor)

3) 10 uF (electrolite capasitor)

4)100 uF (electrolite capasitor)

5)Breadboard (optional)

Step 2: Connecting the Parts

Connecting the Parts

Now put your LM7805 on your breadboard pin 1 is input voltage pin 2 ground pin 3 is output voltage
positive part of the 10uF capasitor should be connected with pin3 and a 100nF capasitor will connected with this in parallel. Then the positive part of the 100uF capasitor should be connected with pin1.Input voltage should not be more than 25-30V and input voltage should be at least 7V. The Capacitors are for secure circuit you can ignore it if you want. The circuit is done.